nickorlow/yayacemu
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

add new pic

Browse source
This commit is contained in:
Nicholas Orlowsky 2024-04-08 01:34:21 -05:00
parent 1f41f702e2
commit 7fdf4e7739
Signed by: nickorlow
GPG key ID: 838827D8C4611687
62 changed files with 9348 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

BIN
db/.cmp.kpt Normal file
View file

Binary file not shown.

300
db/altsyncram_dsq1.tdf Normal file
View file

@ -0,0 +1,300 @@
--altsyncram ACF_BLOCK_RAM_AND_MLAB_EQUIVALENT_PAUSED_READ_CAPABILITIES="CARE" ADDRESS_ACLR_A="NONE" ADDRESS_ACLR_B="NONE" ADDRESS_REG_B="CLOCK0" CBX_DECLARE_ALL_CONNECTED_PORTS="OFF" CYCLONEII_M4K_COMPATIBILITY="ON" DEVICE_FAMILY="Cyclone V" INDATA_ACLR_A="NONE" INIT_FILE="db/chip8.ram0_memory_e9e85012.hdl.mif" LOW_POWER_MODE="AUTO" NUMWORDS_A=4096 NUMWORDS_B=4096 OPERATION_MODE="DUAL_PORT" OUTDATA_ACLR_B="NONE" OUTDATA_REG_B="UNREGISTERED" READ_DURING_WRITE_MODE_MIXED_PORTS="OLD_DATA" WIDTH_A=8 WIDTH_B=8 WIDTHAD_A=12 WIDTHAD_B=12 WRCONTROL_ACLR_A="NONE" address_a address_b clock0 data_a q_b CARRY_CHAIN="MANUAL" CARRY_CHAIN_LENGTH=48
--VERSION_BEGIN 23.1 cbx_altera_syncram_nd_impl 2023:11:29:19:33:06:SC cbx_altsyncram 2023:11:29:19:33:06:SC cbx_cycloneii 2023:11:29:19:33:06:SC cbx_lpm_add_sub 2023:11:29:19:33:06:SC cbx_lpm_compare 2023:11:29:19:33:06:SC cbx_lpm_decode 2023:11:29:19:33:06:SC cbx_lpm_mux 2023:11:29:19:33:05:SC cbx_mgl 2023:11:29:19:43:53:SC cbx_nadder 2023:11:29:19:33:06:SC cbx_stratix 2023:11:29:19:33:06:SC cbx_stratixii 2023:11:29:19:33:05:SC cbx_stratixiii 2023:11:29:19:33:06:SC cbx_stratixv 2023:11:29:19:33:05:SC cbx_util_mgl 2023:11:29:19:33:06:SC VERSION_END
-- Copyright (C) 2023 Intel Corporation. All rights reserved.
-- Your use of Intel Corporation's design tools, logic functions
-- and other software and tools, and any partner logic
-- functions, and any output files from any of the foregoing
-- (including device programming or simulation files), and any
-- associated documentation or information are expressly subject
-- to the terms and conditions of the Intel Program License
-- Subscription Agreement, the Intel Quartus Prime License Agreement,
-- the Intel FPGA IP License Agreement, or other applicable license
-- agreement, including, without limitation, that your use is for
-- the sole purpose of programming logic devices manufactured by
-- Intel and sold by Intel or its authorized distributors. Please
-- refer to the applicable agreement for further details, at
-- https://fpgasoftware.intel.com/eula.
FUNCTION cyclonev_ram_block (clk0, clk1, clr0, clr1, ena0, ena1, ena2, ena3, portaaddr[PORT_A_ADDRESS_WIDTH-1..0], portaaddrstall, portabyteenamasks[PORT_A_BYTE_ENABLE_MASK_WIDTH-1..0], portadatain[PORT_A_DATA_WIDTH-1..0], portare, portawe, portbaddr[PORT_B_ADDRESS_WIDTH-1..0], portbaddrstall, portbbyteenamasks[PORT_B_BYTE_ENABLE_MASK_WIDTH-1..0], portbdatain[PORT_B_DATA_WIDTH-1..0], portbre, portbwe)
WITH ( CLK0_CORE_CLOCK_ENABLE, CLK0_INPUT_CLOCK_ENABLE, CLK0_OUTPUT_CLOCK_ENABLE, CLK1_CORE_CLOCK_ENABLE, CLK1_INPUT_CLOCK_ENABLE, CLK1_OUTPUT_CLOCK_ENABLE, CONNECTIVITY_CHECKING, DATA_INTERLEAVE_OFFSET_IN_BITS, DATA_INTERLEAVE_WIDTH_IN_BITS, DONT_POWER_OPTIMIZE, ENABLE_ECC, INIT_FILE, INIT_FILE_LAYOUT, LOGICAL_RAM_NAME, mem_init0, mem_init1, mem_init10, mem_init11, mem_init12, mem_init13, mem_init14, mem_init15, mem_init16, mem_init17, mem_init18, mem_init19, mem_init2, mem_init20, mem_init21, mem_init22, mem_init23, mem_init24, mem_init25, mem_init26, mem_init27, mem_init28, mem_init29, mem_init3, mem_init30, mem_init31, mem_init32, mem_init33, mem_init34, mem_init35, mem_init36, mem_init37, mem_init38, mem_init39, mem_init4, mem_init40, mem_init41, mem_init42, mem_init43, mem_init44, mem_init45, mem_init46, mem_init47, mem_init48, mem_init49, mem_init5, mem_init50, mem_init51, mem_init52, mem_init53, mem_init54, mem_init55, mem_init56, mem_init57, mem_init58, mem_init59, mem_init6, mem_init60, mem_init61, mem_init62, mem_init63, mem_init64, mem_init65, mem_init66, mem_init67, mem_init68, mem_init69, mem_init7, mem_init70, mem_init71, mem_init8, mem_init9, MIXED_PORT_FEED_THROUGH_MODE, OPERATION_MODE, PORT_A_ADDRESS_CLEAR, PORT_A_ADDRESS_WIDTH = 1, PORT_A_BYTE_ENABLE_MASK_WIDTH = 1, PORT_A_BYTE_SIZE, PORT_A_DATA_OUT_CLEAR, PORT_A_DATA_OUT_CLOCK, PORT_A_DATA_WIDTH = 1, PORT_A_FIRST_ADDRESS, PORT_A_FIRST_BIT_NUMBER, PORT_A_LAST_ADDRESS, PORT_A_LOGICAL_RAM_DEPTH, PORT_A_LOGICAL_RAM_WIDTH, PORT_A_READ_DURING_WRITE_MODE, PORT_B_ADDRESS_CLEAR, PORT_B_ADDRESS_CLOCK, PORT_B_ADDRESS_WIDTH = 1, PORT_B_BYTE_ENABLE_CLOCK, PORT_B_BYTE_ENABLE_MASK_WIDTH = 1, PORT_B_BYTE_SIZE, PORT_B_DATA_IN_CLOCK, PORT_B_DATA_OUT_CLEAR, PORT_B_DATA_OUT_CLOCK, PORT_B_DATA_WIDTH = 1, PORT_B_FIRST_ADDRESS, PORT_B_FIRST_BIT_NUMBER, PORT_B_LAST_ADDRESS, PORT_B_LOGICAL_RAM_DEPTH, PORT_B_LOGICAL_RAM_WIDTH, PORT_B_READ_DURING_WRITE_MODE, PORT_B_READ_ENABLE_CLOCK, PORT_B_WRITE_ENABLE_CLOCK, POWER_UP_UNINITIALIZED, RAM_BLOCK_TYPE, WIDTH_ECCSTATUS = 3)
RETURNS ( dftout[8..0], eccstatus[WIDTH_ECCSTATUS-1..0], portadataout[PORT_A_DATA_WIDTH-1..0], portbdataout[PORT_B_DATA_WIDTH-1..0]);
--synthesis_resources = M10K 4
OPTIONS ALTERA_INTERNAL_OPTION = "OPTIMIZE_POWER_DURING_SYNTHESIS=NORMAL_COMPILATION";
SUBDESIGN altsyncram_dsq1
(
address_a[11..0] : input;
address_b[11..0] : input;
clock0 : input;
data_a[7..0] : input;
q_b[7..0] : output;
)
VARIABLE
ram_block1a0 : cyclonev_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "none",
CLK0_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "db/chip8.ram0_memory_e9e85012.hdl.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "old",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 0,
PORT_A_LAST_ADDRESS = 4095,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock0",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 0,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock0",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a1 : cyclonev_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "none",
CLK0_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "db/chip8.ram0_memory_e9e85012.hdl.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "old",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 1,
PORT_A_LAST_ADDRESS = 4095,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock0",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 1,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock0",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a2 : cyclonev_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "none",
CLK0_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "db/chip8.ram0_memory_e9e85012.hdl.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "old",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 2,
PORT_A_LAST_ADDRESS = 4095,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock0",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 2,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock0",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a3 : cyclonev_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "none",
CLK0_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "db/chip8.ram0_memory_e9e85012.hdl.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "old",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 3,
PORT_A_LAST_ADDRESS = 4095,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock0",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 3,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock0",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a4 : cyclonev_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "none",
CLK0_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "db/chip8.ram0_memory_e9e85012.hdl.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "old",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 4,
PORT_A_LAST_ADDRESS = 4095,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock0",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 4,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock0",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a5 : cyclonev_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "none",
CLK0_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "db/chip8.ram0_memory_e9e85012.hdl.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "old",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 5,
PORT_A_LAST_ADDRESS = 4095,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock0",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 5,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock0",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a6 : cyclonev_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "none",
CLK0_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "db/chip8.ram0_memory_e9e85012.hdl.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "old",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 6,
PORT_A_LAST_ADDRESS = 4095,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock0",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 6,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock0",
RAM_BLOCK_TYPE = "AUTO"
);
ram_block1a7 : cyclonev_ram_block
WITH (
CLK0_CORE_CLOCK_ENABLE = "none",
CLK0_INPUT_CLOCK_ENABLE = "none",
CONNECTIVITY_CHECKING = "OFF",
INIT_FILE = "db/chip8.ram0_memory_e9e85012.hdl.mif",
INIT_FILE_LAYOUT = "port_b",
LOGICAL_RAM_NAME = "ALTSYNCRAM",
MIXED_PORT_FEED_THROUGH_MODE = "old",
OPERATION_MODE = "dual_port",
PORT_A_ADDRESS_WIDTH = 12,
PORT_A_DATA_WIDTH = 1,
PORT_A_FIRST_ADDRESS = 0,
PORT_A_FIRST_BIT_NUMBER = 7,
PORT_A_LAST_ADDRESS = 4095,
PORT_A_LOGICAL_RAM_DEPTH = 4096,
PORT_A_LOGICAL_RAM_WIDTH = 8,
PORT_B_ADDRESS_CLEAR = "none",
PORT_B_ADDRESS_CLOCK = "clock0",
PORT_B_ADDRESS_WIDTH = 12,
PORT_B_DATA_OUT_CLEAR = "none",
PORT_B_DATA_WIDTH = 1,
PORT_B_FIRST_ADDRESS = 0,
PORT_B_FIRST_BIT_NUMBER = 7,
PORT_B_LAST_ADDRESS = 4095,
PORT_B_LOGICAL_RAM_DEPTH = 4096,
PORT_B_LOGICAL_RAM_WIDTH = 8,
PORT_B_READ_ENABLE_CLOCK = "clock0",
RAM_BLOCK_TYPE = "AUTO"
);
address_a_wire[11..0] : WIRE;
address_b_wire[11..0] : WIRE;
wren_a : NODE;
BEGIN
ram_block1a[7..0].clk0 = clock0;
ram_block1a[7..0].portaaddr[] = ( address_a_wire[11..0]);
ram_block1a[0].portadatain[] = ( data_a[0..0]);
ram_block1a[1].portadatain[] = ( data_a[1..1]);
ram_block1a[2].portadatain[] = ( data_a[2..2]);
ram_block1a[3].portadatain[] = ( data_a[3..3]);
ram_block1a[4].portadatain[] = ( data_a[4..4]);
ram_block1a[5].portadatain[] = ( data_a[5..5]);
ram_block1a[6].portadatain[] = ( data_a[6..6]);
ram_block1a[7].portadatain[] = ( data_a[7..7]);
ram_block1a[7..0].portawe = wren_a;
ram_block1a[7..0].portbaddr[] = ( address_b_wire[11..0]);
ram_block1a[7..0].portbre = B"11111111";
address_a_wire[] = address_a[];
address_b_wire[] = address_b[];
q_b[] = ( ram_block1a[7..0].portbdataout[0..0]);
wren_a = GND;
END;
--VALID FILE

BIN
db/chip8.(25).cnf.cdb Normal file
View file

Binary file not shown.

BIN
db/chip8.(25).cnf.hdb Normal file
View file

Binary file not shown.

BIN
db/chip8.ace_cmp.bpm Normal file
View file

Binary file not shown.

BIN
db/chip8.ace_cmp.cdb Normal file
View file

Binary file not shown.

BIN
db/chip8.ace_cmp.hdb Normal file
View file

Binary file not shown.

6
db/chip8.asm.qmsg Normal file
View file

@ -0,0 +1,6 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1712551930527 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 23.1std.0 Build 991 11/28/2023 SC Lite Edition " "Version 23.1std.0 Build 991 11/28/2023 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1712551930527 ""} { "Info" "IQEXE_START_BANNER_TIME" "Sun Apr 7 23:52:10 2024 " "Processing started: Sun Apr 7 23:52:10 2024" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1712551930527 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1712551930527 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off chip8 -c chip8 " "Command: quartus_asm --read_settings_files=off --write_settings_files=off chip8 -c chip8" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1712551930527 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1712551931223 ""}
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1712551937283 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "631 " "Peak virtual memory: 631 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1712551937598 ""} { "Info" "IQEXE_END_BANNER_TIME" "Sun Apr 7 23:52:17 2024 " "Processing ended: Sun Apr 7 23:52:17 2024" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1712551937598 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:07 " "Elapsed time: 00:00:07" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1712551937598 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:07 " "Total CPU time (on all processors): 00:00:07" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1712551937598 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1712551937598 ""}

BIN
db/chip8.asm.rdb Normal file
View file

Binary file not shown.

BIN
db/chip8.cmp.bpm Normal file
View file

Binary file not shown.

BIN
db/chip8.cmp.cdb Normal file
View file

Binary file not shown.

BIN
db/chip8.cmp.hdb Normal file
View file

Binary file not shown.

BIN
db/chip8.cmp.idb Normal file
View file

Binary file not shown.

50
db/chip8.cmp.logdb Normal file
View file

@ -0,0 +1,50 @@
v1
IO_RULES,NUM_CLKS_NOT_EXCEED_CLKS_AVAILABLE,INAPPLICABLE,IO_000002,Capacity Checks,Number of clocks in an I/O bank should not exceed the number of clocks available.,Critical,No Global Signal assignments found.,,I/O,,
IO_RULES,NUM_PINS_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000001,Capacity Checks,Number of pins in an I/O bank should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
IO_RULES,NUM_VREF_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000003,Capacity Checks,Number of pins in a Vrefgroup should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
IO_RULES,IO_BANK_SUPPORT_VCCIO,INAPPLICABLE,IO_000004,Voltage Compatibility Checks,The I/O bank should support the requested VCCIO.,Critical,No IOBANK_VCCIO assignments found.,,I/O,,
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VREF,INAPPLICABLE,IO_000005,Voltage Compatibility Checks,The I/O bank should not have competing VREF values.,Critical,No VREF I/O Standard assignments found.,,I/O,,
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VCCIO,PASS,IO_000006,Voltage Compatibility Checks,The I/O bank should not have competing VCCIO values.,Critical,0 such failures found.,,I/O,,
IO_RULES,CHECK_UNAVAILABLE_LOC,PASS,IO_000007,Valid Location Checks,Checks for unavailable locations.,Critical,0 such failures found.,,I/O,,
IO_RULES,CHECK_RESERVED_LOC,INAPPLICABLE,IO_000008,Valid Location Checks,Checks for reserved locations.,Critical,No reserved LogicLock region found.,,I/O,,
IO_RULES,OCT_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000047,I/O Properties Checks for One I/O,On Chip Termination and Slew Rate should not be used at the same time.,Critical,No Slew Rate assignments found.,,I/O,,
IO_RULES,LOC_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000046,I/O Properties Checks for One I/O,The location should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000045,I/O Properties Checks for One I/O,The I/O standard should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
IO_RULES,WEAK_PULL_UP_AND_BUS_HOLD_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000027,I/O Properties Checks for One I/O,Weak Pull Up and Bus Hold should not be used at the same time.,Critical,No Enable Bus-Hold Circuitry or Weak Pull-Up Resistor assignments found.,,I/O,,
IO_RULES,OCT_AND_CURRENT_STRENGTH_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000026,I/O Properties Checks for One I/O,On Chip Termination and Current Strength should not be used at the same time.,Critical,No Current Strength assignments found.,,I/O,,
IO_RULES,IO_DIR_SUPPORT_OCT_VALUE,PASS,IO_000024,I/O Properties Checks for One I/O,The I/O direction should support the On Chip Termination value.,Critical,0 such failures found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_OPEN_DRAIN_VALUE,INAPPLICABLE,IO_000023,I/O Properties Checks for One I/O,The I/O standard should support the Open Drain value.,Critical,No open drain assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000022,I/O Properties Checks for One I/O,The I/O standard should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000021,I/O Properties Checks for One I/O,The I/O standard should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_PCI_CLAMP_DIODE,INAPPLICABLE,IO_000020,I/O Properties Checks for One I/O,The I/O standard should support the requested PCI Clamp Diode.,Critical,No Clamping Diode assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_OCT_VALUE,PASS,IO_000019,I/O Properties Checks for One I/O,The I/O standard should support the requested On Chip Termination value.,Critical,0 such failures found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000018,I/O Properties Checks for One I/O,The I/O standard should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_PCI_CLAMP_DIODE,INAPPLICABLE,IO_000015,I/O Properties Checks for One I/O,The location should support the requested PCI Clamp Diode.,Critical,No Clamping Diode assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000014,I/O Properties Checks for One I/O,The location should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000013,I/O Properties Checks for One I/O,The location should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_OCT_VALUE,PASS,IO_000012,I/O Properties Checks for One I/O,The location should support the requested On Chip Termination value.,Critical,0 such failures found.,,I/O,,
IO_RULES,LOC_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000011,I/O Properties Checks for One I/O,The location should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_IO_DIR,PASS,IO_000010,I/O Properties Checks for One I/O,The location should support the requested I/O direction.,Critical,0 such failures found.,,I/O,,
IO_RULES,LOC_SUPPORT_IO_STD,PASS,IO_000009,I/O Properties Checks for One I/O,The location should support the requested I/O standard.,Critical,0 such failures found.,,I/O,,
IO_RULES,SINGLE_ENDED_OUTPUTS_LAB_ROWS_FROM_DIFF_IO,INAPPLICABLE,IO_000034,SI Related Distance Checks,Single-ended outputs should be 0 LAB row(s) away from a differential I/O.,High,No Differential I/O Standard assignments found.,,I/O,,
IO_RULES,DEV_IO_RULE_OCT_DISCLAIMER,,,,,,,,,,
IO_RULES_MATRIX,Pin/Rules,IO_000002;IO_000001;IO_000003;IO_000004;IO_000005;IO_000006;IO_000007;IO_000008;IO_000047;IO_000046;IO_000045;IO_000027;IO_000026;IO_000024;IO_000023;IO_000022;IO_000021;IO_000020;IO_000019;IO_000018;IO_000015;IO_000014;IO_000013;IO_000012;IO_000011;IO_000010;IO_000009;IO_000034,
IO_RULES_MATRIX,Total Pass,0;10;10;0;0;10;10;0;0;0;0;0;0;1;0;0;0;0;1;0;0;0;0;1;0;10;10;0,
IO_RULES_MATRIX,Total Unchecked,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
IO_RULES_MATRIX,Total Inapplicable,10;0;0;10;10;0;0;10;10;10;10;10;10;9;10;10;10;10;9;10;10;10;10;9;10;0;0;10,
IO_RULES_MATRIX,Total Fail,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
IO_RULES_MATRIX,lcd_clk,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Inapplicable,
IO_RULES_MATRIX,lcd_data,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Inapplicable,
IO_RULES_MATRIX,led[0],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Inapplicable,
IO_RULES_MATRIX,led[1],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Inapplicable,
IO_RULES_MATRIX,led[2],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Inapplicable,
IO_RULES_MATRIX,led[3],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Inapplicable,
IO_RULES_MATRIX,led[4],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Inapplicable,
IO_RULES_MATRIX,led[5],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Inapplicable,
IO_RULES_MATRIX,rst_in,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Inapplicable,
IO_RULES_MATRIX,fpga_clk,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Inapplicable,
IO_RULES_SUMMARY,Total I/O Rules,28,
IO_RULES_SUMMARY,Number of I/O Rules Passed,9,
IO_RULES_SUMMARY,Number of I/O Rules Failed,0,
IO_RULES_SUMMARY,Number of I/O Rules Unchecked,0,
IO_RULES_SUMMARY,Number of I/O Rules Inapplicable,19,

BIN
db/chip8.cyclonev_io_sim_cache.ff_100c_fast.hsd Normal file
View file

Binary file not shown.

BIN
db/chip8.cyclonev_io_sim_cache.ff_n40c_fast.hsd Normal file
View file

Binary file not shown.

BIN
db/chip8.cyclonev_io_sim_cache.ii_100c_slow.hsd Normal file
View file

Binary file not shown.

BIN
db/chip8.cyclonev_io_sim_cache.ii_85c_slow.hsd Normal file
View file

Binary file not shown.

BIN
db/chip8.cyclonev_io_sim_cache.ii_n40c_slow.hsd Normal file
View file

Binary file not shown.

BIN
db/chip8.map.bpm Normal file
View file

Binary file not shown.

BIN
db/chip8.map.cdb Normal file
View file

Binary file not shown.

BIN
db/chip8.map.hdb Normal file
View file

Binary file not shown.

BIN
db/chip8.map_bb.cdb Normal file
View file

Binary file not shown.

0
db/chip8.quiproj.1387018.rdr.flock Normal file
View file

4108
db/chip8.ram0_memory_e9e85012.hdl.mif Normal file
View file

File diff suppressed because it is too large Load diff

BIN
db/chip8.routing.rdb Normal file
View file

Binary file not shown.

56
db/chip8.sta.qmsg Normal file
View file

@ -0,0 +1,56 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1712551938749 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 23.1std.0 Build 991 11/28/2023 SC Lite Edition " "Version 23.1std.0 Build 991 11/28/2023 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1712551938749 ""} { "Info" "IQEXE_START_BANNER_TIME" "Sun Apr 7 23:52:18 2024 " "Processing started: Sun Apr 7 23:52:18 2024" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1712551938749 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1712551938749 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta chip8 -c chip8 " "Command: quartus_sta chip8 -c chip8" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1712551938749 ""}
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1712551938772 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1712551939456 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "12 12 " "Parallel compilation is enabled and will use 12 of the 12 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1712551939456 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551939481 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551939481 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "chip8.sdc " "Synopsys Design Constraints File file not found: 'chip8.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1712551940847 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551940847 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_INFO" "Deriving Clocks " "Deriving Clocks" { { "Info" "ISTA_DERIVE_CLOCKS_INFO" "create_clock -period 1.000 -name fpga_clk fpga_clk " "create_clock -period 1.000 -name fpga_clk fpga_clk" { } { } 0 332105 "%1!s!" 0 0 "Design Software" 0 -1 1712551940934 ""} { "Info" "ISTA_DERIVE_CLOCKS_INFO" "create_clock -period 1.000 -name cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " "create_clock -period 1.000 -name cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk" { } { } 0 332105 "%1!s!" 0 0 "Design Software" 0 -1 1712551940934 ""} } { } 0 332105 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1712551940934 ""}
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1712551941197 ""}
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1712551941259 ""}
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1712551941263 ""}
{ "Info" "0" "" "Analyzing Slow 1100mV 100C Model" { } { } 0 0 "Analyzing Slow 1100mV 100C Model" 0 0 "Timing Analyzer" 0 0 1712551941268 ""}
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { { "Info" "ISTA_TIMING_NOT_MET_USE_ADA" "" "For recommendations on closing timing, run Report Timing Closure Recommendations in the Timing Analyzer." { } { } 0 11105 "For recommendations on closing timing, run Report Timing Closure Recommendations in the Timing Analyzer." 0 0 "Design Software" 0 -1 1712551945434 ""} } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1712551945434 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "setup -28.406 " "Worst-case setup slack is -28.406" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551945434 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551945434 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -28.406 -1742.530 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " " -28.406 -1742.530 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551945434 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -11.186 -95769.392 fpga_clk " " -11.186 -95769.392 fpga_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551945434 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551945434 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.429 " "Worst-case hold slack is 0.429" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551945664 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551945664 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.429 0.000 fpga_clk " " 0.429 0.000 fpga_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551945664 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.476 0.000 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " " 0.476 0.000 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551945664 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551945664 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1712551945666 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1712551945667 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -2.636 " "Worst-case minimum pulse width slack is -2.636" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551945672 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551945672 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -2.636 -8463.323 fpga_clk " " -2.636 -8463.323 fpga_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551945672 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -0.538 -185.389 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " " -0.538 -185.389 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551945672 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551945672 ""}
{ "Info" "ISTA_REPORT_METASTABILITY_INFO" "Report Metastability: Found 8 synchronizer chains. " "Report Metastability: Found 8 synchronizer chains." { { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Design MTBF is not calculated because the design doesn't meet its timing requirements. " "Design MTBF is not calculated because the design doesn't meet its timing requirements." { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1712551945720 ""} } { } 0 332114 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1712551945720 ""}
{ "Info" "0" "" "Analyzing Slow 1100mV -40C Model" { } { } 0 0 "Analyzing Slow 1100mV -40C Model" 0 0 "Timing Analyzer" 0 0 1712551945722 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1712551945782 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1712551951737 ""}
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1712551952797 ""}
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { { "Info" "ISTA_TIMING_NOT_MET_USE_ADA" "" "For recommendations on closing timing, run Report Timing Closure Recommendations in the Timing Analyzer." { } { } 0 11105 "For recommendations on closing timing, run Report Timing Closure Recommendations in the Timing Analyzer." 0 0 "Design Software" 0 -1 1712551953465 ""} } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1712551953465 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "setup -26.933 " "Worst-case setup slack is -26.933" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551953465 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551953465 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -26.933 -1684.576 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " " -26.933 -1684.576 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551953465 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -11.228 -94100.779 fpga_clk " " -11.228 -94100.779 fpga_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551953465 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551953465 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.484 " "Worst-case hold slack is 0.484" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551953711 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551953711 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.484 0.000 fpga_clk " " 0.484 0.000 fpga_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551953711 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.565 0.000 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " " 0.565 0.000 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551953711 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551953711 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1712551953712 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1712551953713 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -2.636 " "Worst-case minimum pulse width slack is -2.636" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551953723 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551953723 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -2.636 -8927.522 fpga_clk " " -2.636 -8927.522 fpga_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551953723 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -0.538 -184.012 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " " -0.538 -184.012 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551953723 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551953723 ""}
{ "Info" "ISTA_REPORT_METASTABILITY_INFO" "Report Metastability: Found 8 synchronizer chains. " "Report Metastability: Found 8 synchronizer chains." { { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Design MTBF is not calculated because the design doesn't meet its timing requirements. " "Design MTBF is not calculated because the design doesn't meet its timing requirements." { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1712551953779 ""} } { } 0 332114 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1712551953779 ""}
{ "Info" "0" "" "Analyzing Fast 1100mV 100C Model" { } { } 0 0 "Analyzing Fast 1100mV 100C Model" 0 0 "Timing Analyzer" 0 0 1712551953781 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1712551954065 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1712551959681 ""}
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1712551960616 ""}
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { { "Info" "ISTA_TIMING_NOT_MET_USE_ADA" "" "For recommendations on closing timing, run Report Timing Closure Recommendations in the Timing Analyzer." { } { } 0 11105 "For recommendations on closing timing, run Report Timing Closure Recommendations in the Timing Analyzer." 0 0 "Design Software" 0 -1 1712551960917 ""} } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1712551960917 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "setup -14.774 " "Worst-case setup slack is -14.774" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551960918 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551960918 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -14.774 -901.498 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " " -14.774 -901.498 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551960918 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -6.214 -50560.530 fpga_clk " " -6.214 -50560.530 fpga_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551960918 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551960918 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.162 " "Worst-case hold slack is 0.162" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551961180 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551961180 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.162 0.000 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " " 0.162 0.000 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551961180 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.177 0.000 fpga_clk " " 0.177 0.000 fpga_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551961180 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551961180 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1712551961181 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1712551961181 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -2.174 " "Worst-case minimum pulse width slack is -2.174" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551961192 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551961192 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -2.174 -1371.543 fpga_clk " " -2.174 -1371.543 fpga_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551961192 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -0.192 -9.702 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " " -0.192 -9.702 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551961192 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551961192 ""}
{ "Info" "ISTA_REPORT_METASTABILITY_INFO" "Report Metastability: Found 8 synchronizer chains. " "Report Metastability: Found 8 synchronizer chains." { { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Design MTBF is not calculated because the design doesn't meet its timing requirements. " "Design MTBF is not calculated because the design doesn't meet its timing requirements." { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1712551961244 ""} } { } 0 332114 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1712551961244 ""}
{ "Info" "0" "" "Analyzing Fast 1100mV -40C Model" { } { } 0 0 "Analyzing Fast 1100mV -40C Model" 0 0 "Timing Analyzer" 0 0 1712551961245 ""}
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1712551961832 ""}
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { { "Info" "ISTA_TIMING_NOT_MET_USE_ADA" "" "For recommendations on closing timing, run Report Timing Closure Recommendations in the Timing Analyzer." { } { } 0 11105 "For recommendations on closing timing, run Report Timing Closure Recommendations in the Timing Analyzer." 0 0 "Design Software" 0 -1 1712551962139 ""} } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1712551962139 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "setup -12.462 " "Worst-case setup slack is -12.462" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551962139 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551962139 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -12.462 -739.747 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " " -12.462 -739.747 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551962139 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -4.930 -40871.978 fpga_clk " " -4.930 -40871.978 fpga_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551962139 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551962139 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.140 " "Worst-case hold slack is 0.140" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551962440 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551962440 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.140 0.000 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " " 0.140 0.000 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551962440 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.164 0.000 fpga_clk " " 0.164 0.000 fpga_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551962440 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551962440 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1712551962441 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1712551962441 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -2.174 " "Worst-case minimum pulse width slack is -2.174" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551962451 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551962451 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -2.174 -1373.239 fpga_clk " " -2.174 -1373.239 fpga_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551962451 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -0.137 -3.355 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " " -0.137 -3.355 cpu:cpu\|st7920_serial_driver:gpu\|lcd_clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1712551962451 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1712551962451 ""}
{ "Info" "ISTA_REPORT_METASTABILITY_INFO" "Report Metastability: Found 8 synchronizer chains. " "Report Metastability: Found 8 synchronizer chains." { { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Design MTBF is not calculated because the design doesn't meet its timing requirements. " "Design MTBF is not calculated because the design doesn't meet its timing requirements." { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1712551962500 ""} } { } 0 332114 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1712551962500 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1712551963345 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1712551963345 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1353 " "Peak virtual memory: 1353 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1712551963512 ""} { "Info" "IQEXE_END_BANNER_TIME" "Sun Apr 7 23:52:43 2024 " "Processing ended: Sun Apr 7 23:52:43 2024" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1712551963512 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:25 " "Elapsed time: 00:00:25" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1712551963512 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:01:44 " "Total CPU time (on all processors): 00:01:44" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1712551963512 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1712551963512 ""}

BIN
db/chip8.sta.rdb Normal file
View file

Binary file not shown.

BIN
db/chip8.sta_cmp.7_slow_1100mv_100c.tdb Normal file
View file

Binary file not shown.

BIN
db/chip8.tiscmp.fast_1100mv_100c.ddb Normal file
View file

Binary file not shown.

BIN
db/chip8.tiscmp.fast_1100mv_n40c.ddb Normal file
View file

Binary file not shown.

BIN
db/chip8.tiscmp.fastest_slow_1100mv_85c.ddb Normal file
View file

Binary file not shown.

BIN
db/chip8.tiscmp.fastest_slow_1100mv_n40c.ddb Normal file
View file

Binary file not shown.

BIN
db/chip8.tiscmp.slow_1100mv_100c.ddb Normal file
View file

Binary file not shown.

BIN
db/chip8.tiscmp.slow_1100mv_n40c.ddb Normal file
View file

Binary file not shown.