{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1712551555206 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "12 12 " "Parallel compilation is enabled and will use 12 of the 12 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1712551555206 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1712551555292 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1712551555292 ""}
{ "Warning" "WMPP_MPP_RAM_IS_ACTUALLY_ROM_TOP" "" "Found RAM instances implemented as ROM because the write logic is disabled. One instance is listed below as an example." { { "Info" "IMPP_MPP_RAM_IS_ACTUALLY_ROM_SUB" "memory:mem\|altsyncram:mem_rtl_0\|altsyncram_dsq1:auto_generated\|ram_block1a4 " "Atom \"memory:mem\|altsyncram:mem_rtl_0\|altsyncram_dsq1:auto_generated\|ram_block1a4\" is instantiated as RAM, but it is actually implemented as ROM function because the write logic is always disabled" { } { } 0 119043 "Atom \"%1!s!\" is instantiated as RAM, but it is actually implemented as ROM function because the write logic is always disabled" 0 0 "Design Software" 0 -1 1712551555358 "|chip8|memory:mem|altsyncram:mem_rtl_0|altsyncram_dsq1:auto_generated|ram_block1a4"} } { } 0 18550 "Found RAM instances implemented as ROM because the write logic is disabled. One instance is listed below as an example." 0 0 "Fitter" 0 -1 1712551555358 ""}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1712551555754 ""}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1712551555775 ""}
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1712551556100 ""}
{ "Info" "IFSAC_FSAC_RAM_METASTABILITY_INFO" "" "Design uses memory blocks. Violating setup or hold times of memory block address registers for either read or write operations could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements." { } { } 0 176045 "Design uses memory blocks. Violating setup or hold times of memory block address registers for either read or write operations could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements." 0 0 "Fitter" 0 -1 1712551556280 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1712551565142 ""}
{ "Extra Info" "IFSAC_FSAC_START_IO_MAC_RAM_PACKING" "" "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" { } { } 1 176246 "Moving registers into I/O cells, DSP blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1712551565178 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "chip8.sdc " "Synopsys Design Constraints File file not found: 'chip8.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1712551566238 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1712551566238 ""}
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1712551566558 ""}
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Fitter" 0 -1 1712551566558 ""}
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1712551566563 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MAC_RAM_PACKING" "" "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" { } { } 1 176247 "Finished moving registers into I/O cells, DSP blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1712551568020 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1712551568056 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1712551568056 ""}
{ "Warning" "WCUT_CUT_UNATTACHED_ASGN" "" "Ignored locations or region assignments to the following nodes" { { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "lcd_cs " "Node \"lcd_cs\" is assigned to location or region, but does not exist in design" { } { { "/opt/intelFPGA/23.1/quartus/linux64/Assignment Editor.qase" "" { Assignment "/opt/intelFPGA/23.1/quartus/linux64/Assignment Editor.qase" 1 { { 0 "lcd_cs" } } } } } 0 15706 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "Design Software" 0 -1 1712551568422 ""} } { } 0 15705 "Ignored locations or region assignments to the following nodes" 0 0 "Fitter" 0 -1 1712551568422 ""}
{ "Info" "IFSV_FITTER_PREPARATION_END" "00:00:13 " "Fitter preparation operations ending: elapsed time is 00:00:13" { } { } 0 11798 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1712551568422 ""}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "12 " "Router estimated average interconnect usage is 12% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "57 X22_Y23 X32_Y34 " "Router estimated peak interconnect usage is 57% of the available device resources in the region that extends from location X22_Y23 to location X32_Y34" { } { { "loc" "" { Generic "/home/nickorlow/programming/school/warminster/yayacemu/" { { 1 { 0 "Router estimated peak interconnect usage is 57% of the available device resources in the region that extends from location X22_Y23 to location X32_Y34"} { { 12 { 0 ""} 22 23 11 12 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1712551718020 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1712551718020 ""}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1712551878467 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1712551878467 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:03:08 " "Fitter routing operations ending: elapsed time is 00:03:08" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1712551878471 ""}
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 49.90 " "Total time spent on timing analysis during the Fitter is 49.90 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1712551894479 ""}
{ "Info" "IFSV_FITTER_POST_OPERATION_END" "00:00:29 " "Fitter post-fit operations ending: elapsed time is 00:00:29" { } { } 0 11801 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1712551923094 ""}
{ "Warning" "WFITCC_FITCC_IGNORED_ASSIGNMENT" "" "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." { } { } 0 171167 "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." 0 0 "Fitter" 0 -1 1712551923931 ""}
